Intercom_Circuits
|
2 Line Intercom With Telephone Line Changeover Circuit: The circuit presented here can be used for connecting tw1o telephones in parallel and also as a2-line intercom. |
|
Creating your Own Telephone Ne2 Rk: you can easily create your own intercom system using tw1o telephones, a 9-volt battery (or some other simple power supply) and a300-ohm resistor |
|
Intercom Preamp: a convenient way of making an intercom is to use a loudspeaker as a microph1- |
|
Remote Control using Telephone: Here is a tele-remote circuit which enables switching "on" and "off" of appliances through Telephone lines. The circuit described here can be used to switch up to nine appliances (corresponding to the digits1 through 9 of DTMF the Telephone key-pad). The Telephone can be used to switch on or switch off the appliances also while being used for normal conversation. FAIR WARNING -- THIS SITE HAS ANNOYING POP UP ADS. |
|
tw1o Line Intercom With Telephone Line Changeover Circuit: The circuit presented here can be used for connecting tw1o telephones in parallel and also as a2-line intercom. |
|
Using the Comrex Hotline or Vector on a Dry Pair: how to use simple pair of wires with no voltage, ringing signals to interconnect normal Telephone line devices |
![]() |
||||||||
HOME
DATASHEET
BLOG
Category
Index of Schematics
| A | B | C | D |
E |
| F | G | H | I | J |
| K | L | M | N | O |
| P | Q | R | S | T |
| U | V | W | X | Y |
| Z |
Popular Schematics
Microcontroller based schematics
Microcontroller based schematics
